Sam Hughes

https://www.printerbase.co.uk - 529 Posts - 10 Comments

Printerbase sponsor Hyde United’s Roary the Tiger

Sam Hughes22 March 201728 March 2018

by Sam Hughes28 March 201828 March 20180790

On the day when Hyde United became a community-owned, supporter-run football club, many fans expressed their excitement about obtaining a new ‘Tiger’ mascot uniform for the club. The old mascot uniform was, unfortunately, starting to fall apart. So, recognising the need to raise the club’s...

General News

Review of the Canon i–SENSYS MF6140dn Colour Laser MFP

Sam Hughes22 February 201727 March 2018

by Sam Hughes27 March 201827 March 20180928

We’re trying to find fault with this model, but it really is beautifully conceived and configured. We might perhaps wish for gigabit networking rather than older 10/100, and the standard memory of 256 MB is a little skimpy. In general, though, it’s a fantastically versatile...

General News

Disney and MakieLab reveal 3D printing partnership

Sam Hughes15 December 201522 September 2017

by Sam Hughes22 September 201722 September 20170833

Walt Disney have continued their venture into the world of 3D printing by teaming up with MakieLab to create merchandise. MakieLab, a 3D-printed doll designer, have started to sell doll outfits that feature patterns of Disney’s Minnie Mouse and Maleficent. However, there is more to...

General News

Siemens experience benefits of 3D Printing

Sam Hughes14 December 201523 April 2019

by Sam Hughes23 April 201923 April 20190835

Siemens may be the largest engineering company in Europe, with a focus on healthcare, industry, energy, infrastructure and cities, but even they have felt the huge benefit of utilising 3D printing as part of their processes. Siemens have long led the way when it comes...

General News

Xerox named a Managed Workflow Services leader

Sam Hughes11 December 20153 March 2016

by Sam Hughes3 March 20163 March 20160898

Xerox has been recognised as a leader in the IDC MarketScape: Managed Workflow Services Hardcopy 2015 Vendor Assessment. This new report focuses on the Managed Workflow Service (MWS) market, which the analyst firm defines as a set of services that automate and optimise vertical and...

General News

Rever 3D Printer – low-cost, easy-to-use 3D printing

Sam Hughes7 December 2015

by Sam Hughes7 December 201501003

Many manufacturers are exploring the possibility of introducing 3D printers into the family home – and the team behind the Rever 3D Printer is hoping to lead the way. The Rever 3D Printer has been created by Qubea in a bid to remove the complicated...

General News

Epson PaperLab – the in-office paper recycling system

Sam Hughes4 December 20153 March 2016

by Sam Hughes3 March 20163 March 201601354

Epson have recently announced that they have developed what they believe to be the very first compact office paper-making system – the Epson PaperLab – which is capable of producing new sheets of paper from shredded waste paper without the use of water. The technology...

General News

Kyocera devices to support Google Cloud Print

Sam Hughes3 December 201523 April 2019

by Sam Hughes23 April 201923 April 20190880

Kyocera have revealed that a selected range of their printers and multifunction devices will now support Google Cloud Print. Google Cloud Print is a service that allows you to print directly from smartphones, tablets, laptops and other devices to any cloud-connected printer, removing the need...

General News

Xerox launch Digital Alternatives and DocuShare updates

Sam Hughes2 December 2015

by Sam Hughes2 December 20150789

Xerox have announced an updated release of their Digital Alternatives and DocuShare personal productivity solutions, which are specifically designed to improve office efficiency through automating document processing. Digital Alternatives 2.0 is a desktop and mobile application that allows you to automate paper-based workflows, helping your...

General News

Stratasys 3D printers used for brain surgery pre-planning

Sam Hughes25 November 2015

by Sam Hughes25 November 20150660

Stratasys, a leading 3D printer manufacturer, have put their devices to use for brain surgery pre-planning, resulting in significantly reduced risks when it comes to the procedure. Teaming up with The Jacobs Institute, a medical research facility in Buffalo, New York, Stratasys set about 3D...

Load more posts

Sam Hughes

Printerbase sponsor Hyde United’s Roary the Tiger

Review of the Canon i–SENSYS MF6140dn Colour Laser MFP

Disney and MakieLab reveal 3D printing partnership

Siemens experience benefits of 3D Printing

Xerox named a Managed Workflow Services leader

Rever 3D Printer – low-cost, easy-to-use 3D printing

Epson PaperLab – the in-office paper recycling system

Kyocera devices to support Google Cloud Print

Xerox launch Digital Alternatives and DocuShare updates

Stratasys 3D printers used for brain surgery pre-planning

Get in Touch With Us

General Information

Sign Up